CS01: CSAMS Additional Training Online Course:


Special offer - Composite Structural Analysis Modules (CSAMs) software is provided with a  1 month  license (CSAMS normally £199 per year, now reduced to £129) when you purchase the course​.


CSAMS SPECIAL OFFER: £99

For one year licence.


Please Note: 
Upon purchase an email will be sent to you giving you a link to download CSAMS. (please allow 24 hours) 

​​​​​​

The use of carbonfibre and other composite materials is rapidly expanding and pervades all markets. Carbonfibre had an estimated annual growth of 12% from 2012–2018. The strongest demand for carbonfibre composites comes from aircraft and aerospace, wind energy and the automotive industry. This means that if you want to go into the composites world, the opportunities for you are huge. 


Course Outline    
If you are a graduate engineer or company manager, excited but bewildered by the growing composite industry and interested in designing composite components but would like to know where to start in structural composite materials. This Online Composite Course is for you.

The online course is a set of four educational videos, each video progressively takes the student or the newcomer to composites deeper into the world of composites. One video is released per day as follows:
1.    First Link:      Lecture 1 (plus associated notes)                Structural Composites for all sectors.
2.    Second Link:  Lecture 2 (plus lecture notes)                     The merits of using Structural Composites.
3.    Third Link:     Lecture 3 (plus lecture notes)                      Layered Composites.
4.    Fourth Link:   Lecture 4 (plus lecture notes)                      An Engineers start in Structural composites.

From an engineer’s approach I will show you where to start in the process of designing with composites.
You will learn:
- where to start the initial design and composite component sizing. 
- what you need to know to calculate the thickness of a ply
- how to tailor the composite ply for the engineering benefits you seek.

This Introduction to Structural Composites Course also contains:
- a short history of composite materials.
- the best way to start to understand the world of composite materials.
- what is a composite material?
- the merits of using composites materials
- how composite material properties are different to metals.
- how to tailor the composite to suit your performance requirements
- two essential composite properties that you need to know.
- the simple building block composite design approach.
- the simplest and most popular technique to make a composite material.

I have filtered out the important aspects to give you a very quick understanding of Structural Composite Materials. 


Important: This online course is intended to be suitable for beginners in composites to provide you with a basic understanding of composites. There are other courses featured on this website which cover the mathematics of designing structural composites.

​The course designer, Dr. Warren B. Leigh, started as a Stress Engineer on composites in 1984 whilst at British Aerospace and has tailored this course to provide extensive but selective information and techniques to the student that he has acquired over the decades since.​


​​CSAMs: Composite Structural Analysis Modules
CSAMs is designed to be easy to use. It is great for the beginner, the graduate/practicing engineer and the fabricator. Start your initial composite designs with CSAMs.

With CSAMs, you can make rapid composite laminate architecture design investigations to meet stiffness, strength and minimum weight requirements. Determine the equivalent Young’s Modulus, allowable strength, volume and weight fraction, laid down ply-thickness and other properties of continuous and chopped strand mat (CSM) fibre composites. Hybrid composites can also be designed with CSAMs. CSAMs caters for uni-directional, 0/90, 90 deg and +/-45 deg plies of different gsms of carbonfibre, glassfibre and kevlar.
A basic manual is included with the software. 


For adhesive bond calculations of Lap and T-Peel joints, JSAMs is recommended.


Special Offer

As mentioned above, a 1 month license of CSAMs is included with your purchase of this course, giving you full access to the software's functionality.


CSAMs Additional Training Course

To learn how to apply CSAMs to practical scenarios, we have designed an extensive online course including video tutorials, manuals with step-by-step worked examples and an additional 2 months CSAMs license. Learn more here.



Course Details
​Attended Course Duration:                                   One Day 
Course Host:                                                       Dr. Warren B. Leigh PhD
Online Course Cost:                                             £59

Composite Structural design, Premium tuition. One to one tuition is available:             


If you pay by PayPal, please use your name as a reference.



Please enquire to book a course.
​Weekend and Evening courses available.
One to one direct consultations available​.


Contact

High Peak Courses Ltd.
Mob:                           +44 (0) 7980 545231
Tel:                            +44 (0) 1663 635226
E-mail:                        info@highpeakcourses.com​​​


Copyright © 2016 High Peak Courses Ltd (subsidiary of Jura Carbon Ltd.). Registered Address at: Harold Smith Chartered Accountants, St. Asaph Business Park, Denbighshire, LL17 0JA.

Design and Analysis of Structural Composite Materials
High Peak Courses Logo

Copyright © 2016 High Peak Courses Ltd (subsidiary of Jura Carbon Ltd.). Registered Address at: Harold Smith Chartered Accountants, St. Asaph Business Park, Denbighshire, LL17 0JA.

Tel: +44 (0) 1663 635226 or +44 (0) 7980 545231

Email: info@highpeakcourses.com