MODULE 5: Design of Composite Structures.
Composite Structural Sizing and Design by Hand Calculation.
MODULE 6: Composite sandwich structures design
MODULE 7: Composite Joint Design.
C1: Comprehensive Design & Analysis of Structural Composite Materials (5 Day)
Copyright © 2016 High Peak Courses (subsidiary of Jura Carbon Ltd.). Registered Address at: Harold Smith Chartered Accountants, St. Asaph Business Park, Denbighshire, LL17 0JA.
For the candidate who desires a deeper knowledge and a more thorough understanding of composites, then High Peak Courses provides you with a very credible two weeks training, allowing you to learn without the hurry. You need no prior knowledge or experience of composites, because the course is designed to introduce you gently to the essential practical aspects of design for manufacture and analysis of composite materials.
At the end of the course you will have understanding and experience of different composite manufacturing materials systems, using glassfibre, carbonfibre, Kevlar, silicon carbide fibres and biocomposites.
The main focus of this structural composite course, is on showing you how to do the initial design of composite component sizing.
You will be able to design composite laminates based on strength or stiffness requirements. You will be able to make structural stress analysis of the monolithic or sandwich panel laminates using simple hand calculations.
You will construct a Finite Element Analysis (FEA) composites model and run the analysis using industrially recognised FEA software such as MSC Patran-Nastran or Femap-NX Nastran and for Femap you will receive a free 45 day licence.
The course designer started as a Stress Engineer on composites in 1984 whilst at British Aerospace and has tailored this course to provide extensive but selective information and techniques to the student that he has acquired over the decades since.
High Peak Courses.
Mob: +44 (0) 7980 545231
Tel: +44 (0) 1663 635226
If you pay by PayPal, please use your name as a reference
MODULE 1: Composite laminate Analysis
MODULE 2: Quick techniques to estimate
MODULE 3: Composite Laminate Analysis
MODULE 4: Sizing calculations.
Basic structural calculations for open and closed composite sections. Subject to the following loading.
• Axial Force on C-section
• Bending on C-section
• torsion on C-section (Student work)
Course Host: Dr. Warren Leigh PhD
Course Duration: Five days (40 Hours)
Copyright © 2016 High Peak Courses Ltd (subsidiary of Jura Carbon Ltd.). Registered Address at: Harold Smith Chartered Accountants, St. Asaph Business Park, Denbighshire, LL17 0JA.
Tel: +44 (0) 1663 635226 or +44 (0) 7980 545231